Pages Navigation Menu

The Process of Iron Manufacturing

Repair A Small Hole In A Wire Mesh Fence That Surrounds Your Business Property

Posted by on Aug 1, 2016 in Uncategorized | Comments Off on Repair A Small Hole In A Wire Mesh Fence That Surrounds Your Business Property

If the wire mesh fence that surrounds your business property has a small hole in it due to a sharp object coming into contact with it, temporarily repair the structure by completing the following steps. Once finished, the fence’s surface will remain intact until you are able to have the affected area repaired or placed by a professional company. Materials ruler piece of wire mesh sharp scissors detergent water  sponge ultraviolet and moisture-resistant thread embroidery needle masking tape safety pins spray to prevent thread from fraying Trim The Damaged Area And Prepare The Enclosure Use a pair of sharp scissors to trim any jagged mesh edges. Line up a ruler around each side of the damaged section to determine how much mesh will be needed to repair it. Cut a piece of replacement mesh that is the same size. Remove dirty residue from the mesh enclosure’s surface by wiping it off with a soapy sponge. Once you have finished, wait for the treated areas to dry. Secure The Replacement Piece Of Mesh Cut a piece of ultraviolet and moisture-resistant thread that is long enough to repair the damaged area. Thread an embroidery needle with the piece of thread and tie the end of it in a knot. Place the replacement piece of mesh over the damaged area. Secure it with a few strips of masking tape or by inserting safety pins through it and the original piece of mesh. Insert the needle through both pieces of mesh. Pull the thread so that it is taut. Attach the new piece of mesh by using a simple straight stitch to sew around the edge of the new piece of mesh. With this type of stitch, you will alternate by pulling the needle towards you through both pieces of mesh and pushing it away from you through both pieces of mesh. Once the new piece of wire mesh is secure, cut the end of the thread and tie a double knot in it. Spray the surface of the thread with a product that is designed to prevent thread from fraying. Take Care Of The Wire Mesh Carefully clean the mesh surface in the future so that it does not become damaged again. Use a soft cloth, scrub brush with natural bristles, and soapy water to eliminate stains. Afterwards,  rinse the wire mesh off with a strong stream of plain water. The replacement piece of mesh will remain intact until you are ready to hire a fencing contractor to permanently repair the area that has been...

read more

The Guide To Buying Pallet Racking

Posted by on Jul 6, 2016 in Uncategorized | Comments Off on The Guide To Buying Pallet Racking

Pallet racks let you organize your warehouse in a lot of different ways to save space, safely store your goods and separate items based on different classifications. You can get pallet racks at a much lower rate when you decide to buy refurbished. You will need to consider the types of pallet racks available on the market, dimensions and how to select the best company to purchase from, all of which are explained below. The Types Of Pallet Racking Systems When purchasing refurbished pallet racks, you can choose between some of the following systems: The selective pallet rack –  This is the most used pallet rack system available. They utilize upright stature that allows you to easily go from aisle to aisle with your fork lift. Selective pallet racks are often stacked high with multiple beams. The pallet flow rack –  The purpose of this system is to make the absolute most of your warehouse space. The pallet flow rack allows you to store between two and six pallet positions to maximize on your inventory storage. These racks often have skate wheel systems for easier loading. The drive-in and drive-through pallet rack –  These rack systems are excellent for space-saving, since they offer as much as 75% more storage. This racking system is best if you have large amounts of the same inventory in your warehouse. Important Pallet Racking Specifications To make the correct purchase, remember to consider the following pallet rack specifications: Height –  To make sure you are making the best use of vertical space, your pallet racking height must match your average pallet height. You also need to remember regulations so that you can stack pallets safely. Material –  Aluminum, steel and fiberglass are some of the most used materials when creating pallet racking. Fourteen-gauge steel is the strongest and gives the most longevity. Expansion –  When purchasing pallet racks, be sure that they have the potential to be added onto so that you can expand your storage ability. Find The Ideal Pallet Racking Company When searching for the ideal pallet racking company to buy from, think about the following points: Longevity –  A pallet racking company that has been in business for a long time shows that they have continuously been helpful to customers. Get a D&B report –  This report will explain the pallet racking company’s fiscal soundness, who they purchased their inventory from, whether the company has had any lawsuits and how many people they employ. Follow-up service –  While buying pallet racks is the first step, be sure that you do business with pallet racking professionals who can also handle deliveries installations and replacements. When you use these three tips, you will be well prepared to buy any pallet racking that you need from any manufacturing business, such as Commercial...

read more

What To Look For In Your First Injection Molding Job

Posted by on Jun 10, 2016 in Uncategorized | Comments Off on What To Look For In Your First Injection Molding Job

When you’re looking for your first job in injection molding, you may not know what to look for in your work environment. Whether you’re working with an injection molding recruiter who specializes in the industry or you’re doing the legwork on your own, there are a few things that you should look for in your prospective work environment. Here are a couple of things to consider. Ask For A Tour When you’re interviewing for a prospective position in injection molding, ask about a tour of the work floor. That way, you get a chance to evaluate the work environment. Make sure that the entire work area is well lit. When things are well lit, your visibility is better. This helps to reduce the chances that you’ll miss a small molding flaw in the quality checks. The work area should be clearly labeled as well. There should be no question about what belongs where. Since you’ll likely have specific production quotas, you want to be sure that your work area would be streamlined and optimized for efficiency. Everything should flow in a logical order and all of the work areas should be clearly labeled so that you know exactly what goes where. Consider The Ergonomic Support The industrial environments, like injection molding production, are demanding on the body, and long, labor-intensive hours can lead to human error if you aren’t comfortable enough on the job site. In addition, the lack of ergonomic support can lead to injuries from movements like bending, twisting and turning. Look for a work environment designed with this in mind so that everything is in easy reach and at a consistent level. In addition, there should be cushioning on the floors in the work area. Padding on the floors will reduce the wear and tear on your knees, hips and back. Choosing a job with a work environment that’s been ergonomically designed can reduce the risk of worker’s compensation claims and lost work time due to repetition injuries and other strain. These are two important factors to consider when you’re looking for a new job in injection molding. If you’re having a hard time finding openings on your own, reach out to an injection molding recruiter today to see what kinds of positions they are looking to fill. Some manufacturers will work with a recruiter like Molding Business Services in the interest of getting pre-screened and validated candidates to reduce their training and screening on the job....

read more

Lost In The Conversation? 3 Things You Should Know About Dynamometers

Posted by on May 16, 2016 in Uncategorized | Comments Off on Lost In The Conversation? 3 Things You Should Know About Dynamometers

if your partner is into cars, but you’re not, you may feel like they’re speaking a different language when they talk about their cars. This is particularly true when you hear your partner talking about dynos. No, they aren’t talking about dinosaurs. Your partner is actually talking about a device that measures the speed, power and force behind an engine. Here are three facts that will help you understand how a dynamometer works. It Measures Speed You might not realize it, but you see a type of dynamometer every time you drive a car. In fact, you’re looking at it every time you check your speed. The speedometer in your car is a very basic type of dynamometer. The speedometer uses electromagnetism to rotate a magnet inside a small metal cup inside your car. As the car speeds up, the cup rotates causing the indicator to adjust, which shows up on your dashboard. It Controls Chassis Movement If you’ve ever been in an auto repair shop, you’ve probably seen another type of dynamometer – the chassis dynamometer, to be exact. The chassis dynamometer is basically a rolling road that allows your engine to power your car while remaining in one spot. The chassis dynamometer is useful for automotive tests that require your engine to be operating for proper readings – such as for smog checks or suspension tests where the wheels need to be in motion to determine proper balance. Without the chassis dynamometer, mechanics would have to conduct diagnostic tests while your car was being operated on the road. It Measures Torque When you’re working on a high-performance engine, torque is everything. Understanding the amount of torque on your engine will help prevent your engine from overheating and burning up. Too much torque and your engine will have too much power. Not enough torque and your engine will be lacking in power when you need it most. Your dynamometer will allow you to monitor torque, which will then allow you to monitor horsepower inside your engine, which means power will be maximized. Just because your partner is in to high-performance engines, and you don’t know a thing about engines, it doesn’t mean you don’t have to be left out of the automotive conversations. The next time your partner starts talking about dynamometers – and the reasons they need a new one – you’ll be able to use the information you learned here to understand what they’re talking about and get involved in the conversation. Visit to learn...

read more

The Perks Of Electronically Enabled Submerisble Pumps

Posted by on Apr 11, 2016 in Uncategorized | Comments Off on The Perks Of Electronically Enabled Submerisble Pumps

Submersible water pumps are vital to well filtration systems. They are also used in sewage treatment. Of course, pumps come in a wide range of different sizes and types. They also come in a variety of different price ranges. Smaller pumps are often cheaper, but the technology inside the pump has a bigger effect on the price. This article explains the perks of investing in pumps with built-in electronics. Built-In Electronic Diagnostics Submersible pumps, whether they are being used in deep water wells or sewage treatment, will be much more efficient and effective if they have built-in electronic controls. This allows you to not only monitor the pressure rating, it also allows you to get real time diagnostics. You can monitor the efficiency of the pump. This is especially helpful in filtering for wells. You can ensure that your water is safe and that your pump is maintaining the appropriate pressure. For instance, you can make sure that your pressure is not altered or reduced during season shifts when the weather changes suddenly. These changes in the water temperature can definitely put more stress on the pump. They can also cause problems with the actual borehole that houses the pump. Maintaining constant pressure inside the borehole is of the utmost importance. This is why it is so useful to have a pump with a built-in electronic device that feeds you important diagnostic info.  Electronic diagnostics in sewage treatment pumps allow you to monitor for toxic substances in the water. They will give you exact readings of the water before and after it passes through the pump. You can avert a sanitation and environmental crisis by identifying a malfunctioning pump so you can fix it ASAP. Better Energy Efficiency and Durability To many, the best part of electronic pumps is that they are more energy efficient. A constant pressure pump can suck up a lot of energy. If you are running multiple pumps at once or filtering large amounts of sewage, you will benefit from an energy efficient. Over the years, especially when working with large volumes of water, you will save a lot of money on your utility bills. The electronic monitor also enables you to make adjustments to your pump as soon as they pop up. So, you can make adjustments to the levels and fix the problem before it starts to damage your pump or borehole. Electronic pumps come in all sizes from companies like PFC Equipment, Inc and can be used in just about any...

read more

FAQ Regarding The English Wheel

Posted by on Feb 11, 2016 in Uncategorized | Comments Off on FAQ Regarding The English Wheel

Steel fabrication requires a wide range of tools, one of the most popular of which is the English wheel. If you’re a beginning steel fabricator, you may not yet understand the usefulness of this item. Here are the answers to some of the most frequently asked English Wheel questions. What Is An English Wheel And When Should I Use It? An English wheel is a metal fabricating tool that looks something like a large “C.” The top tip of the “C” is the die, which is what cuts the sheets of metal. The English wheel is used to bend, groove, and shape sheets of metal of all shapes and sizes. This makes it useful for crafting a wide range of metal projects, including these popular projects: Gas tanks Nose bowl Construction panels Sculptures It’s somewhat similar to a planishing hammer, and choosing between the two items requires understanding what type of project benefits from their use. Planishing hammers are typically designed for small metal projects, such as pans or patch panels, because they leave behind a “hammered” impression in the metal. By contrast, the English wheel is more useful for larger projects, such as quarter panels, because it creates a finer, chrome-like finish. While you could use either item for large or small items, the English wheel generally lacks the precision of the planishing hammer, which by contrasts creates too rough of a surface for larger projects. How Do You Use An English Wheel? While delving into every aspect of English wheel design would require a full manual and years of experience, a few tips can help you understand how it works. First, you must install the die (i.e. the etching point) into the tip at the top of the “C” frame. Then, you place your sheet of metal on the wheel, and carefully adjust the height of the die (with the die-height wheel located at the base of the arm) so that it touches the metal. Then, you turn on the machine: this forces the die into cutting action. Now, press the metal sheet firmly across the wheel with your hands. The wheel will help pull and position the metal, but you need to move the metal manually with your hands to ensure you get the best grooves and cuts. Wear gloves to ensure you don’t cut your hands on the metal sheet. Now that you better understand this unique item, you can start training to use it right away. It will take some practice to get used to its unique controls and properties, but you’ll be glad that you did when you’re cranking out beautiful projects with...

read more

Top Tips For Reducing The Amount Of Trash You Have To Put On The Curb

Posted by on Jan 24, 2016 in Uncategorized | Comments Off on Top Tips For Reducing The Amount Of Trash You Have To Put On The Curb

If you would like to reduce the amount of trash that you put out on the curb, you might want to check out some of the following suggestions. With the following tips in mind, you will be saving space in your garbage cans in no time at all. Use A Trash Compactor You can purchase and use an electric trash compactor that you simply plug into a standard outlet. These are generally found at many home improvement stores that sell a variety of kitchen appliances. Before taking your trash outside to your garbage can, simply compact the waste. Just make sure that you are not trying to compact anything that comes in a can that is under pressure, such as a spray paint can. Start Your Own Compost Pile You can throw a lot of scraps from your kitchen into a compost pile that you can create in your own backyard. Such kitchen scraps include egg shells, used coffee grounds, and leftover fruits and vegetables. Not only will this reduce the amount of garbage that you have to put on the curb, but you will end up with a lot of well fertilized soil that you can use for vibrant flowers, tasteful herbs, or plentiful fruits and veggies from your garden. Start Recycling You might just surprise yourself at how much garbage you save from the curb and the landfill when you start recycling. All you need is three plastic bins for the different types of things that you can recycle. One will be for glass, one will be for cans, and the other will be for cardboard. Just make sure that you quickly locate a local recycling center so you can easily take in all of your recyclable material as the bins start to fill up. Break Down The Boxes Many people end up with a lot of wasted space in their garbage bags because their food boxes are not broken down before being placed in the bag. By taking a few extra moments to open the boxes from all sides, you will be able to make them lay flat, which will allow you to fit much more garbage in each bag. With those four tips in mind, you should have no trouble making sure that you are able to reduce the amount of garbage that you put out on the curb each pick for pick up. Talk with a company like Cavossa Disposal Corporation for more...

read more

Using Etching Cream To Enhance The Appearance Of A Glass Railing

Posted by on Dec 21, 2015 in Uncategorized | Comments Off on Using Etching Cream To Enhance The Appearance Of A Glass Railing

If a plain glass railing is installed next to the staircase in your home and you want to enhance its appearance, you can create a unique design on its surface with etching cream. Once the design has been added, maintain the railing’s surface so that the design remains intact. Materials glass cleaner lint-free cloths soft-bristled scrub brush masking tape drop cloth rubber gloves etching cream disposable bowl plastic spoon stencils double-sided tape measuring tape foam brush artist’s paintbrush bucket of water trash bag Clean The Glass And Cover Hardware With Tape Clean the glass railing with glass cleaner and a lint-free cloth. If any stains are on the glass, use a soft-bristled scrub brush to loosen them. Wipe the railing off with a dry, clean cloth once any residue has been removed. Cover pieces of hardware that are connected to the railing with strips of masking tape so that they are not exposed to the etching cream. Place a drop cloth underneath the railing to collect any etching cream that accidentally spills as you are applying it.  Prepare The Etching Cream And Fill In The Stencils Protect your hands from chemicals that the cream is made out of with a pair of rubber gloves. Pour a bottle of etching cream into a disposable bowl. Mix the cream with a plastic spoon until it is an even consistency. Attach stencils to the railing with double-sided tape. Use a measuring tape to help you place the stencils in an even line. Apply a coat of etching cream to the end foam brush and fill in the stencils. If any of the stencils contain fine details, fill them in with an artist’s paintbrush. Wait a few minutes for the etching cream’s appearance to change to one that is hazy. Remove The Etching Cream And Other Materials Use a damp rag to remove the etching cream from the railing. Rinse the rag out and add more water to it once it becomes covered with cream. Carefully pull the stencils from the railing when you have finished. Remove the pieces of masking tape and drop cloth. Dispose of any materials that are covered with etching cream. Maintain the glass railing by cleaning it with mild detergent and a soft cloth when it becomes dirty. Avoid using any products that contain harsh chemicals. Carefully following these maintenance steps on a regular basis will preserve the appearance of the etched design. For more information about railings, visit Incom...

read more

Three Tips To Help You Get More Money When Scrapping For Extra Cash

Posted by on Nov 17, 2015 in Uncategorized | Comments Off on Three Tips To Help You Get More Money When Scrapping For Extra Cash

With the market prices of metals on the rise, you may want to consider cashing in on some scrap metal. Everything from old appliances to junk cars can be turned in for a handful of dollar bills. If you want to get the most from your efforts, you may want to understand a little bit more about scrap metals and the materials that are the most valuable. Here are a few tips to help you get the most for your scrapping adventures: 1. Setting Aside All The Copper And Brass When recycling metal, the copper and brass fittings will be some of the most valuable materials. You want to make sure that you separate all these materials. Copper can be found in plumbing and motors is used for many different electrical devices. You can find the brass fittings in many different pipe connections. You will want to have a pile of the dense brass, which is heavy and will add up quickly because of its weight. Separate the yellow and red colored brass because the red materials have a higher copper content. 2. Separate The Non-Ferrous Steel That Is More Valuable You may be tempted to throw all the steel materials into one pile. It is a good idea to look at steel closely because the non-ferrous steel can be much more valuable. Many commercial materials contain stainless steel, which is much more valuable than raw metals. If you want to get the most for your efforts, make sure you separate these materials from the common metals before you recycle them. 3. Know Where Aluminum Is Used Instead Of Steel Aluminum is another material that you can find in many things that contain steel. It is often used for lightweight parts in commercial machinery. You can also find aluminum in many car parts. If you are disassembling something like a car, check the parts to see if they are made of aluminum. In cars, this is often things like heads, transmissions and small engine blacks. For machinery, aluminum can be found in things like casings, manifolds and other parts. These are some tips that can help you get a little more from your scrap recycling efforts. If you are ready to take your metal in for recycling, contact a recycling center and talk with them about their recycling programs and how they can help you get cash for the scrap materials you have...

read more

Three Solutions To Correct House Settling On Soft Soils

Posted by on Oct 20, 2015 in Uncategorized | Comments Off on Three Solutions To Correct House Settling On Soft Soils

Settling foundations can cause many problems with your home. For a basement or crawl space, these problems can lead to water damage. The settling can also cause serious structural problems and other damage. This can be in the form of doors and windows being out of plumb or it can be cracks in drywall. Here are some of the solutions to help deal with settling homes on soft soils: 1. Tensioned Concrete To Even Out The Foundation Settling There are many problems that you can have with your foundation. The problems can be due to uneven settling in soft soils. If your home is on a concrete slab, one way to fix this problem is with tensioned concrete. This is where steel cables are installed beneath the slab and tension is applied to them. This will prevent the uneven settling of your home and allow it to settle evenly. Tensioned cables will make your home settle as one solid piece, instead of certain areas settling more than others. 2. Soil Grouting To Shore Faulty Footings Causing Foundation Settling Soil grouting is another way that a foundation can be repaired to fix settling. This is the process of mixing soil with a cement mixture to prevent settling under heavy loads. This is often done for heavy commercial buildings, but it can also be done for homes that have deep, soft soils where other solutions may not be enough to prevent settling. This can be a good alternative for foundations where tensioned concrete cannot be used, such as a home on a basement with soft soil beneath the foundation. This is a system that can help strengthen the structure and foundation of your home to prevent further settling. 3. Pier Systems And Foundation Pinning To Support A Settling Structure Another solution to help support a settling home is installing piers or foundation underpinning. This is where the area of the home that is settling is jacked up and pier systems are installed beneath the foundation. These can be used for many types of foundations. Foundation underpinning is also used to correct problems with foundations that were built with poor footings. The underpinning can be used to support the area of your home where structural loads are causing settling and damage. If your home has a settling problem, contact a foundation contractor such as T. Luckey Sons Inc, and ask them about foundation underpinning for your...

read more